Black Orc Bosses - Avatars of War

Sigmarite Boutique is proud to be a licensed printer of 'Avatars of War' miniatures. These models are intended for use with 28mm/32mm games but are much larger as befitting the meanest of Black Orcs and so they are all 45mm-55mm tall.

These models are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. Supports will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks. The resin I use is usually grey in colour, but depending on availability, white or black may be used.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.

Because they are printed in resin, these models are not suitable for use by children, and they are not toys.

If you have any questions or concerns, please message me, I'm happy to help.

Materials: UV Cured Resin.