Print Your Monsters - Nightmare Grotto Fungus

Sigmarite Boutique is proud to be a licensed printer of Print Your Monsters designs. These models from the 'Nightmare Grotto Fungus' release are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. Supports will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks. The resin I use is usually grey in colour, but depending on availability, white or black may be used. Please note the scenic base is included with the Behemoth, but bases are sold separately for the other models.

For scale the Nightmare Fungus and Fungus Warriors average 45mm tall. The behemoth is approximately 85mm tall and stands on a base that is roughly 75mm around. The Behemoth is a multipart model and requires assembly.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.

Because they are printed in resin, these models are not suitable for use by children.

If you have any questions or concerns, please message me, I'm happy to help.

Materials: UV Cured Resin.