The Kraken - Txarli Factory

Sigmarite Boutique is proud to be a licensed printer of Txarli Factory designs. These models can be printed in either PLA+ plastic at .2mm layer height, or in 8K resin on 8K or higher resultion printers. Resin will provide finer detail but it is a more fragile material.

Each order consists of the head and all eight tentacles. The models are printed with three base styles - water, earth or no base. The model shown in the 4th picture is for scale purposes only and is not included.

Sample painted images are provided to highlight detail and demonstrate the size of the printed models. Supports will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks, and some small parts may have supports left on the model in order to protect them during shipping. The resin I use is usually grey in colour, but depending on availability, white or black may be used. This model will be partially hollowed to prevent print failure, reduce weight and cost.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.

Because it is printed in resin, this model is not suitable for use by children.

If you have any questions or concerns, please message me, I'm happy to help.

Materials: 8K UV Resin, PLA Plus Plastic.