Enchanted Obelisks - Fantastic Plants and Rocks - Print Your Monsters

Sigmarite Boutique is proud to be a licensed printer of Print Your Monsters designs. These terrain pieces are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Painted models are shown only to highlight detail. Refer to the scale image for sizing compared to a 28mm model.

Sample painted images are provided to highlight detail and demonstrate the size of the printed models. Supports will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks, and some small parts may have supports left on the model in order to protect them during shipping. The resin I use is usually grey in colour, but depending on availability, white or black may be used. This model will be partially hollowed to prevent print failure, reduce weight and cost.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.

Because it is printed in resin, this model is not suitable for use by children.

If you have any questions or concerns, please message me, I'm happy to help.

Materials: UV Cured Resin.