Frost Bitten Berzerkers - Glacial Depths - Mini Monster Mayhem

*** PLEASE READ THIS BEFORE ORDERING THESE MODELS ***

These models have a number of *extremely* thin/fine details and joints including the waist, knee, elbow and blade. They will always be shipped fully on their supports in order to arrive intact. This means that support removal will have to be done by the customer, and it will require great care to avoid breakage. Only order these models if you are familiar with working with resin models and supports. These are NOT good models for beginners.

****

Sigmarite Boutique is proud to be a licensed printer of Mini Monster Mayhem designs. These models from the 'Glacial Depths' release are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. Supports will be left on these models, please read the note above. The resin I use is usually grey in colour, but depending on availability, white or black may be used.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.

Because they are printed in resin, these models are not suitable for use by children.

If you have any questions or concerns, please message me, I'm happy to help.

Materials: UV Cured Resin.