Necromancer and Mount - Print Your Monsters

Sigmarite Boutique is proud to be a licensed printer of 'Print Your Monsters' Miniatures. This model is slightly larger than 32mm scale, with the necromancer being roughly 37mm tall. The model will be printed in 8K resin on 8K or higher resolution printers.

You can select the model with or without the ring of magic gas. The ring is designed to fit on 80mm round bases. Because they are printed in resin, these models are not suitable for use by children and they are not toys.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.

If you have any questions or concerns, please message me, I'm happy to help.

Materials: 8K UV Cured Resin.