City Debris - Txarli Factory
Debris 1 / Grey PLA+
$3.00
Sale price
$3.00
Regular price
Skip to product information
Sigmarite Boutique is proud to be a licensed printer of Txarli Factory designs. These models are printed in either 8K resin on 8K or higher resolution printers, or in quality PLA+ plastic a .2mm layer height. These are small pieces for scatter terrain, averaging 2" - 3" around.
Sample painted images are provided to highlight detail and demonstrate the size of the printed models. Supports will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks, and some small parts may have supports left on the model in order to protect them during shipping. The resin I use is usually grey in colour, but depending on availability, white or black may be used. This model will be partially hollowed to prevent print failure, reduce weight and cost.
UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.
Because it is printed in resin, this model is not suitable for use by children.
If you have any questions or concerns, please message me, Iām happy to help.
City Debris - Txarli Factory
$3.00
Sale price
$3.00
Regular price
Please note that all products are print on demand. Allow 3-5 Business Days for printing before shipping.
Sample painted images are provided to highlight detail and demonstrate the size of the printed models. Supports will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks, and some small parts may have supports left on the model in order to protect them during shipping. The resin I use is usually grey in colour, but depending on availability, white or black may be used. This model will be partially hollowed to prevent print failure, reduce weight and cost.
UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.
Because it is printed in resin, this model is not suitable for use by children.
If you have any questions or concerns, please message me, Iām happy to help.