Skeletal Spearmen - Highlands Miniatures
5 Spearmen / Square
$13.88
Sale price
$13.88
Regular price
Skip to product information
Sigmarite Boutique is proud to be a licensed printer of Highland Miniatures designs. These skeleton spearmen consist of 4 poses and 4 separate shield designs. You will receive a equal mix of each model type to maximize variety. They include a plain 20mm printed base. These models will be shipped with their supports still attached due to very thin extremities and joints. This will help them to arrive without damage from shipping.
These models are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. The resin I use is usually grey in colour, but depending on availability, white or black may be used.
UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.
Because they are printed in resin, these models are not suitable for use by children.
If you have any questions or concerns, please message me, Iām happy to help.
Skeletal Spearmen - Highlands Miniatures
$13.88
Sale price
$13.88
Regular price
Please note that all products are print on demand. Allow 3-5 Business Days for printing before shipping.
These models are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. The resin I use is usually grey in colour, but depending on availability, white or black may be used.
UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.
Because they are printed in resin, these models are not suitable for use by children.
If you have any questions or concerns, please message me, Iām happy to help.