Print Your Monsters - Chaos Beast Invasion
Beast 1
$11.32
Sale price
$11.32
Regular price
Skip to product information
Sigmarite Boutique is proud to be a licensed printer of Print Your Monsters designs. These multipart models from the ‘Chaos Beast Invasion‘ release are printed in UV curable resin, and will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. Supports on large pieces will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks. Small or fragile pieces will ship on their supports to limit risk of loss or breakage in shipping. The resin I use is usually grey in colour, but depending on availability, white or black may be used.
For scale the beasts are all 35-45mm tall. Beast 4 is taller than the others, and is almost 60mm tall. The Sorcerer is 50mm tall and the Giant beast stands almost 90mm tall.
UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.
Because they are printed in resin, these models are not suitable for use by children.
If you have any questions or concerns, please message me, I‘m happy to help.
Print Your Monsters - Chaos Beast Invasion
$11.32
Sale price
$11.32
Regular price
Please note that all products are print on demand. Allow 5-10 Business Days for printing before shipping.
For scale the beasts are all 35-45mm tall. Beast 4 is taller than the others, and is almost 60mm tall. The Sorcerer is 50mm tall and the Giant beast stands almost 90mm tall.
UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful. If any uncured resin seeps from the model, wear gloves and clean with soap and water and then leave the model in the sunlight or another UV light source to cure the uncured resin. This is an unlikely event, but uncured resin should not come in contact with your skin should it occur.
Because they are printed in resin, these models are not suitable for use by children.
If you have any questions or concerns, please message me, I‘m happy to help.